Universal telescopic adjustable, strong square tube push frame allows installation to most 4×4 ATV / UTV machines. The push frame is fixed to the rear hitch ball and with the adjustable chains to the ATV front arms. Installation takes 5-10 minutes.360 degrees rotating wheel carriers with 4” wheels to carry the weight of the snow blower. The ATV or UTV is used only to push the machine.Control panel for ejection tube movement with stop button to shut off the blower engine.Working position and transportation position (set with vehicle mounted winch).Easy to use belt tensioner, fast removal and installation of the clutch belt, if needed.Protective shaft bolts against excess load in rotor shaft movment.Wider 1800mm / 71 inches body is suitable to use with larger side-by-side / UTV machines.Comes with installation and user manuals.Max vehicle length for snow blower installation, measured from hitch ball to front end nose, is 3100mmVIDEO CLIP: https://youtu.be/6LneCdNec6Q
Iron Baltic
Tuotenumero: 30.10000
Snow blower 1800 mm / 71 in( 18hp Briggs & Stratton )
4898 €
122 € / kk (esimerkkilaskelma)
Front mounted winch and rear ball type hitch required for installing the snow blower!
Myymälässä: 0 kpl
Verkkokaupassa: 0 kpl
Tutustu myös
-
Power Unit 19HP( Quadivator 88100-08 )Briggs & StrattonCLEARANCE OFFER
2064,60 €STOCK CLEARANCE -17% off retail. Power unit is required to power up Quadivator tools such as a mower (p/n 73.2000) and snow blower (p/n 77.1000). -
V-Plow 1800 G2hydraulic turning version
3893,60 €Heavy duty steel construction! Suitable for cleaning snow or pushing sand, dirt, gravel, etc. Model specific mounting kit needed for installing the push tubes (see section mid-mount adapters). Kit consist of Gen -
Snow blower 1250 mm / 49 in( 18hp Briggs & Stratton )
4774 €An ATV front mounted winch (min 1500lbs) and rear hitch-ball needed for installing the snow blower! -
Wood chipperG2( Briggs & Stratton 14hp )
2728 €Towable construction, tow hitch 50 mm Permitted max wood material diameter 120 mm / 4,7 inch -
Quadivator 62″ finishing Mower(with Briggs & Stratton 19Hp)CLEARANCE OFFER
3306,67 €Stock clearance offer (-17% off the retail price) for the finishing mower kit by Quadivator. Universal design and construction that fits with most ATV-s. Kit consists of finishing mower deck RD62 Hypercut -
Snow blower 1250 mm / 49 in( 14hp Briggs & Stratton )
4340 €An ATV front mounted winch (min 1500lbs) and rear hitch-ball needed for installing the snow blower! -
Flail mower 14hp( Briggs & Stratton )
3224 €Flail mower to be used with ATV / UTV or a small tractor. Cuts effectively the large (wild) grass fields or roadsides. -
UTV Two-bottom plow( Quadivator 86935 )
2759 €Suitable to use with the UTV / side by side machines or also with the bigger / heavier ATV-s.